SHOP BY CATEGORY

Showing 1 - 15 of 15
At Height Double Leg 12^ Stiff Tether
The double leg stiff tether is the perfect choice for pairing your rope wrench with the DMM Hitch Tending Pulley. The tether includes a rubber bumper to keep it positioned properly. It can be used with either the hitch climber or the Pinto style pulley.
8541ST4
At Height Double Leg Stiff Tether 9.5^
The double leg stiff tether is the perfect choice for pairing your rope wrench with the DMM Hitch Tending Pulley. The tether includes a rubber bumper to keep it positioned properly. It can be used with either the hitch climber or the Pinto style pulley.
8541104
At Height Single Leg Stiff Tether
This is a tether designed for use with the Singing Tree ZK2 Rope Wrench. The small rubber hose helps to hold the Rope Wrench from going into “neutral”. Using 8mm BeeLine, and a custom technique, this tether is rigid while still allowing just enough flex when needed.
8351ST2
Hitch Hiker 2
The Hitch Hiker 2 incorporates a steel friction device with your hitch cord to produce a great device for hybrid tree climbing systems. The Hitch Hiker advances smoothly and engages instantly when weighted, with easy slack tending, and may be used in double or single rope systems. The Hitch Hiker 2 has great durability, and the low cost compared to other systems makes it a great value. The Hitch Hiker is sold complete with steel carabiner and 4' of 9mm Sterling RIT Cord.
HITCHH2
$240.00
Petzl Chicane Auxillary Brake
The CHICANE allows ZIGZAG and ZIGZAG PLUS mechanical Prusiks to be used on single ropes. It provides continuous additional friction on descents. The excellent compatibility of the CHICANE and mechanical Prusik as an assembled unit ensures smooth rope glide through the brake during ascents. The ergonomic handle provides excellent grip and facilitates movement while limb walking. Thanks to the openable side plate, installation is quick and easy.
D022CA00
$139.95
Out of Stock. More Coming Soon.
Reon Rounds Tether
The Reon Rounds Tether, is a spring loaded aluminum rope wrench tether. It works on multiple climbing devices. By moving a series of interchangeable plates, you can set the Reon Rounds Tether to work with a hitchclimber pulley, a pinto pulley, unicender, or other stationary rope system approved device.
ROUNDSTETHER
$200.00
Rock Exotica Akimbo
The Akimbo is a versatile mid-line attachable friction device that allows climbers to ascend and descend a stationary or moving rope system without changing equipment, and without detaching from your saddle. Adjustable settings allow for optimal performance with a range of climber weights and rope diameters.
RG80
$350.00
Singing Tree Rope Runner
The Singing Tree Rope Runner is a single rope ascent and descent device for 11-13mm 24-strand ropes. The Rope Runner provides smooth control of the rate of descent for the climber on single, 24-strand line. It has become one of the most popular devices for SRT climbing. The tested and recommended rope for the Rope Runner is the 11.5 MM 24 strand Rocket Line, Blue Craze, Sunburst or Cherry Bomb from All Gear.
ROPERUNNER
$349.95
Singing Tree Rope Runner Baby Bump
This replacement friction plate for the Rope Runner features a 1/8? bump on the main friction plate between the two most concentrated friction points. The Baby Bump provides more friction in the bottom section of the Runner, requiring less pressure to disengage the bird section, giving you a smoother, more controlled descent.
RRBODYBB-PINK
$49.95
Out of Stock. More Coming Soon.
Singing Tree Rope Wrench Slick Pin
The Slic pin is used in Singing Tree Rope Wrench by ISC to make the device mid-line attachable. You can install your line without having to fully remove the slic pin, thus eliminating the risk of dropping and losing the pin. This pin works for the ZK2 only.
KT280A
Sterling Rope Rod Technora for Rope Wrench
The Rope Rod from Sterling is a stiff tether made of Technora. The Sterling tether is more rigid than stiff. That slight flex helps with slack tending when returning from limb walks. The Rope Rod is skinny and flat which gives more room for your rope to run (at the point of attachment to your micro pulley).
SCS90ALY11
Unicender
The Unicender can be used as a mechanical split tail in place of a friction hitch in double rope technique. In the single rope technique, the Unicender takes the place of both ascenders and descender. With the ability to be used in both Doubled Rope Technique (DdRT) and Single Rope Technique (SRT), the Unicender fits the way you like to climb like no other tool. Additionally, the Unicender attaches conveniently mid-line. For rope sizes 11 to 13mm, or 7/16” to 1/2”.
UNICENDER
$320.00
Showing 1 - 15 of 15