SHOP BY CATEGORY

The RP110D micro pulley from CMI features a double sheave, and a becket.

The RP110 micro pulley from CMI is used primarily used as a slack tender for your friction hitch. The sideplates swing open to allow placement anywhere on the line. The aluminum cheeks have a 7/8" hole for a carabiner. A double lock nut holds everything together on an aluminum axle.

The RP141 micro pulley from CMI is perfect for situations where two independent tie-ins are needed.

The RP144 shackle pulley from CMI is both strong and compact. It weighs just 3 oz and is among the smallest load-bearing pulleys on the market.

This kit has everything you need to start climbing with DMM’s Hitch Climber. It includes a DMM Hitch Climber Pulley, two DMM Ultra O Carabiners, and a 30" Epicord 9.3 mm Sewn Eye and Eye. 9.3 mm Epicord will work on 11 or 12 mm climbing lines.

The Treemagineers bring us this compact rigging plate and high efficiency pulley in one! Developed with those clever folk at DMM, this is the first hot forged pulley to hit the market and was designed to be at the heart of friction hitch climbing systems (using eye to eye slings), but has many other applications.

With hardly a straight line in sight, the hot forged curves of the DMM Pinto Pulley make for a textile friendly environment. Attachment points can be used for webbing, cordage and carabiners. Spliced or stitched terminations can be made directly to the rounded cross section of the attachment holes or the curved becket. All sorts of wonderful configurations become possible!

With hardly a straight line in sight, the hot forged curves of the DMM Pinto RIG Pulley make for a textile friendly environment. Attachment points can be used for webbing, cordage and carabiners. Spliced or stitched terminations can be made directly to the rounded cross section of the attachment holes or the curved becket. All sorts of wonderful configurations become possible!

This pulley is slightly larger than the regular Pinto pulley, and can take up to a 16mm (5/8") rope.

The Pinto Rig Spacer is designed for the larger DMM Pinto pulley only. It prevents the sideplates of the Rig from being squeezed together when cordage is run through the eyes of the pulley. The interior hole of this spacer will accommodate a range of carabiners and textiles up to 14mm in diameter.

The Pinto Spacer is designed for the smaller DMM Pinto pulley only. It prevents the side-plates of the Pinto from being squeezed together when cordage is run through the eyes of the pulley. The interior hole of this spacer will accommodate a range of carabiners and textiles up to 14mm in diameter.

The Petzl FIXE micro pulley is a compact pulley with fixed side plates. This makes a great redirect and is highly efficient due to the sheave being mounted on self-lubricating bushings.

The Petzl Mobile is an ultra compact, lightweight pulley designed for hauling systems and redirects. The sheave is mounted on self-lubricating bushings for good efficiency.

The Hydra is a swiveling triple attachment pulley made by Rock Exotica. It combines two devices into one, for a slimmed-down option in work positioning, ideal for use on your saddle’s rope bridge.