These devices can add a lot more power to aid you in felling, for raising light limbs, or even for taking the slack out of you rigging rope.
The CMI RopeJack is a mechanical advantage tool for quickly and easily pre-tensioning static lines, light lifting, and cabling. The RopeJack is small and light enough to be carried aloft by a climber, and the length of the handle on the RopeJack limits excessive loading in order to avoid rope damage. The CMI RopeJack is used to remove slack and stretch for lowering and to lift the tips on light limbs without having to break out the big guns. Simply attach both ascenders to your line and crank away to tighten a static line or climb a rope.
ROPEJACK
This kit uses fiddle blocks with a Gibbs quick-release rope grab to generate great lifting power with a secure progressive capture. The fiddle blocks have a 5:1 advantage and has a built-in progress capture rope grab. WLL: 1000 lbs.
FIDBLO75
This kit uses fiddle blocks with a Gibbs quick-release rope grab to generate great lifting power with a secure progressive capture. The fiddle blocks have a 5:1 advantage and has a built-in progress capture rope grab. WLL: 1000 lbs.
RIGGINGKIT51075
Temporarily Out of Stock. More Coming Soon.
This kit uses fiddle blocks with a Gibbs quick-release rope grab to generate great lifting power with a secure progressive capture. The fiddle blocks have a 5:1 advantage and has a built-in progress capture rope grab. WLL: 1000 lbs.
ARADDON
Temporarily Out of Stock. More Coming Soon.
This kit uses fiddle blocks with a Gibbs quick-release rope grab to generate great lifting power with a secure progressive capture. The fiddle blocks have a 5:1 advantage and has a built-in progress capture rope grab.
USR-FB-DLX
Handle replacement kit for Maasdam rope puller.
MPPHRK
Ratchet wheel replacement kit for Maasdam rope puller.
MPPRPRK
Feed the rope into the puller and the drum grips the rope, allowing for limitless lengths of rope. The ratchet allows for controlled tension release or free spin of drum. The rope puller has a 3/4 ton capacity with a 10:1 leverage advantage. You can add blocks for increased mechanical advantage.
A-0
Temporarily Out of Stock. More Coming Soon.
The JAG double pulley is designed for use with the JAG TRAXION double progress capture pulley to make a 4:1 haul system. Sheaves mounted on sealed ball bearings for excellent efficiency.
P45
The JAG double pulley is designed for use with the JAG TRAXION double progress capture pulley to make a 4:1 haul system. Sheaves mounted on sealed ball bearings for excellent efficiency.
P54P
The Micro Traxion pulley from Petzl is a very efficient ultra-light, ultra-compact progress capture pulley. The cam can be locked in open position so the device can be used as a simple pulley.
P53P
Openable even when attached to the anchor, the PRO pulley is designed for maximum simplicity when setting up hauling or load deviation systems. The side plate that locks under load, the large-diameter sheave and the high efficiency sealed ball bearings make a pulley that is well suited for handling heavy loads.
P46
Temporarily Out of Stock. More Coming Soon.
The Aztek Pulley Kit from Rock Exotica is the ultimate in personal mechanical advantage. The Aztek Kit quickly changes from a 4:1 with a redirect to a 5:1 just by rotating the system.
P41 KIT