• callus (717) 690-1646
  • Alternate Text 3535 Lincoln Highway East, Kinzers, PA, 17535                 

SHOP BY CATEGORY

Showing 1 - 29 of 29
12' Buckingham Treesqueeze
The Buckingham TreeSqueeze is made from the same 7/16 uniline as the Buck RigidLine except the rope is doubled for extra rigidity, cut resistance and surface area. A large aluminum ring on the end allows for easy attachment to your saddle with a carabiner—or, when used with a ringed prusik, the climbing line can be fed through to allow a choke on the tree. This provides Fall Protection during a gaff out or an escape option if you have to quickly descend the tree. Retrieval of the Buckingham TreeSqueeze™ from the ground is the same as retrieving Friction Savers.
7L08T112A6J1
$236.99
3' Timber Blue Friction Saver
This friction saver is made with durable Edelrid 16-Strand XPE Timber Blue. Sewn by the professional splicers at Gap Arborist Supply, this friction saver is durable, easy to use and a great value for the money.
CSAVERBLUE
8' Buckingham Treesqueeze
The Buckingham TreeSqueeze is made from the same 7/16 uniline as the Buck RigidLine except the rope is doubled for extra rigidity, cut resistance and surface area. A large aluminum ring on the end allows for easy attachment to your saddle with a carabiner—or, when used with a ringed prusik, the climbing line can be fed through to allow a choke on the tree. This provides Fall Protection during a gaff out or an escape option if you have to quickly descend the tree. Retrieval of the Buckingham TreeSqueeze™ from the ground is the same as retrieving Friction Savers.
7L08T18J
$169.99
ANSI Arborist Crane Tie in Point with Carabiners
Securely anchor your climbing line above the mechanical termination of your crane cable with double redundancy. Ultimate safety is provided by twin independent Yale R.I.N.G. cut resistant lines, terminated to two ISC Steel Anchor Rings, and two captive eye ISC steel carabiners. Both strands are individually covered with chafe sleeve. Not for use on multi-part crane setups with running cables.
CRANETIEIN
$129.99
ART Ropeguide 10'
The Ropeguide is ART’s patented friction saver. It allows for smooth rope work and special care of the tree’s cambium. The Ropeguide 2010 combines the best features of its predecessors with the fascinating results of ongoing research: It is very light, can take on even bigger loads and at the same time offers even more safety.
33840
$299.99
ART Ropeguide Twinline Friction Saver
The ART RopeGuide TwinLine is a new innovation on the RopeGuide friction saver. It’s now possible to install the RopeGuide from the ground easily, and through one work step install two lines to the anchor point. This twin-line setup gives the ability to ascend with either SRT or DDRT, or use the long anchoring rope as a second ascent rope for a second climber or rescuer. The integrated ZipAbsorber lowers the impact force in the event of a fall, and the whole system can be quickly and easily retrieved from the ground.
RGTLC
$379.99
equaLIZA
An anchoring device accessory for the pulleySAVER. The equaLIZA is to be used as an equalizing link if the pulleySAVER is used on two anchor points.
7350837
Leather Cambium Saver
This cambium saver is lightweight, durable and easy to use. The rope and cambium saver from Weaver is a favorite among many tree climbers. Made of tough leather, it is lightweight and simple to deploy. Designed for use on ropes less than 5/8" in diameter.
08-98400
Petzl EJECT Friction Saver
Designed for tree care, the EJECT friction saver allows the rope to be set up, without damaging the tree, even in the narrowest of forks. It offers multiple setup configurations in single or double branch configurations, and has an adjuster that allows precise length adjustment of the friction saver. Thanks to the high-efficiency pulley, which facilitates rope glide at the anchor point, ascents and movement in the tree are optimized. The included retrieval ball makes the system easily retrievable from the ground
G001AA00
$249.99
Sirius multiSAVER 0.7m (without ringLOOP), white/green
Made of Sirius kernmantle polyester, this novel adjustable anchor device from Teufelberger is impressive because of its well thought-out design. What's more, multiSAVER boasts a patented splice [slaice]® and is length adjustable via the integrated prusik, ensuring functionality and great ease of use.
7350807
Sterling Adjustable Friction Saver
This 5' adjustable anchor kit from Sterling Rope is made with HTP 11mm cordage and is retrievable. The sewn prusik loop allows you to adjust the length of the device as needed. Features ISC fully marked aluminum rings.
KTARAP1119
Treesbee False Crotch
The Treesbee False Crotch protects the tree and improves rope glide at the anchor; it can be retrieved from the ground. The wide webbing limits twisting and triple thickness of termination on large ring side makes the webbing more rigid during retrieval.The terminations are easy to identify with color coding.
C04110
Treesbee False Crotch Screwlink
The Treesbee False Crotch protects the tree and improves rope glide at the anchor; it can be retrieved from the ground. The wide webbing limits twisting and triple thickness of termination on large ring side makes the webbing more rigid during retrieval.The terminations are easy to identify with color coding. The strap is constructed with a large diameter ring and quick link (triangle) for ropes with sewn terminations (the link opens to let the sewn termination through).
C04110 M
Showing 1 - 29 of 29