Product Category
ART

ART Products

ART Positioner Swivel Rope Grab
When it comes to mechanical adjusters on lanyards the ART Positioner 2 has become the tree climber’s first choice. The Positioner grabs the rope as soon as it comes under load. Contrary to conventionally used rope clamps the Positioner allows a reliable one-handed adjustment even under load. The ergonomically formed release lever offers comfortable handling.
29454S
$182.99
ART Ropeguide 10'
The Ropeguide is ART’s patented friction saver. It allows for smooth rope work and special care of the tree’s cambium. The Ropeguide 2010 combines the best features of its predecessors with the fascinating results of ongoing research: It is very light, can take on even bigger loads and at the same time offers even more safety.
33840
$381.99
ART Ropeguide Twinline Friction Saver
The ART RopeGuide TwinLine is a new innovation on the RopeGuide friction saver. It’s now possible to install the RopeGuide from the ground easily, and through one work step install two lines to the anchor point. This twin-line setup gives the ability to ascend with either SRT or DDRT, or use the long anchoring rope as a second ascent rope for a second climber or rescuer. The integrated ZipAbsorber lowers the impact force in the event of a fall, and the whole system can be quickly and easily retrieved from the ground.
RGTLC
$512.99
ART SnakeAnchor 2.5m
The Snakeanchor from ART serves as lanyard and anchoring device, it can be continuously adjusted thanks to the stitched intervals. The Snakeanchor can be installed open and used as friction device with pulley or biner in the desired length. It also can be installed in choking mode and continuously adjusted as well. Because of the tube shaped ring this procedure works much better than with any other known tool so far.
VSA25
$204.99
ART SnakeAnchor 5m
The Snakeanchor from ART serves as lanyard and anchoring device, it can be continuously adjusted thanks to the stitched intervals. The Snakeanchor can be installed open and used as friction device with pulley or biner in the desired length. It also can be installed in choking mode and continuously adjusted as well. Because of the tube shaped ring this procedure works much better than with any other known tool so far.
VSA50
Temporarily Out of Stock. More Coming Soon.
$251.99
ART spiderjack cam 11-13mm
With use, dirt and grit in your ropes will erode this replaceable part in your SPIDERjack and grip will not be as pronounced. For use with 11-13mm ropes.
32257
LockJack Sport Ascender/Descender
The Lockjack can completely replace the friction hitches used on climbing lines. It works as both an ascender and descender for self-belay in the moving rope system (MRS). The advantage of the Lockjack is that friction is applied to the rope with a smooth aluminum surface which causes less friction while climbing for an effortless advance, and a smoother and more easily controlled descent. While climbing, the Lockjack tends slack by itself as the weight of rope below the climber pulls the line through the device. The Lockjack is a handy, efficient, yet easy-to-use climbing and descending device for climbing trees. Works with 1/2” rope.
LOCKJACKSW
$389.99